Projects / Sawhorse plans / 36″ wide, 30″ tall
36″ sawhorse, 30″ tall
A 36-inch 2×4 sawhorse at a 30-inch working height. Build two for a cutting station.
Intermediate2 hours7 parts2× lumber
Have scraps? Check this project against your wood
Cutting diagram
Bright pieces are your parts; the dimmed wood is left over. Every cut allows ⅛″ for the saw blade.
Cut list
| Part | Qty | Width × length | Cut from | |
|---|---|---|---|---|
| A | Top beam | 1 | 3½″ × 36″89 × 914 mm | 2× lumber |
| B | Leg | 4 | 3½″ × 31″89 × 787 mm | 2× lumber |
| C | Brace | 2 | 3½″ × 17″89 × 432 mm | 2× lumber |
How to build it
- Cut the beam at 36″, four legs at 31″ and two braces at 17″. Angle the top and bottom of each leg at 15° so the legs splay outward.
- Screw two legs to each end of the beam, one on each face, with the angled tops flush.
- Stand it up and check it's steady at 30″. Trim a leg if it rocks.
- Screw a brace across each pair of legs about 8″ from the floor.
- Treat the beam as sacrificial. You'll cut into it over time, and that's the point.