Projects / Floating shelf plans / 24″ long, 7¼″ deep
24″ floating shelf, 1×8
A 24-inch shelf, 7¼″ deep, that hangs on a hidden cleat screwed into the studs.
Beginner1½ hours2 parts1× board
Other sizes:18″ long, 5½″ deep24″ long, 5½″ deep36″ long, 5½″ deep48″ long, 5½″ deep18″ long, 7¼″ deep24″ long, 7¼″ deep36″ long, 7¼″ deep48″ long, 7¼″ deep
Have scraps? Check this project against your wood
Cutting diagram
Bright pieces are your parts; the dimmed wood is left over. Every cut allows ⅛″ for the saw blade.
Cut list
| Part | Qty | Width × length | Cut from | |
|---|---|---|---|---|
| A | Shelf | 1 | 7¼″ × 24″184 × 610 mm | 1× board |
| B | Wall cleat | 1 | 1½″ × 22″38 × 559 mm | 1× board or 2× lumber |
How to build it
- Cut the shelf to 24″ and the cleat to 22″.
- Find the studs. A 24″ shelf spans at least two studs at 16″ centres, so screw the cleat into both. Check it with a level before the second screw.
- Set the shelf on the cleat and mark where the cleat meets its underside.
- Drive screws down through the shelf into the cleat, countersinking them so they can be filled.
- Fill the screw holes, sand flush, and finish.